- Suppliers & Dealers
-
A•LOK Products Inc.
In the early 1970's, the primary concern of the wastewater construction industry was watertightness. At that time, as it is now, precast concrete was recognized as the construction material best able to provide strength and durability in underground structures. The key however, to protecting public health and safety as well as the local environment was a watertight connection between pipeline and structure. In order to address this need, the original A•OK connector design was conceived. From this original connector evolved A•LOK Products, Incorporated, a company created in order to meet the widespread demand for such patented innovations in watertight technology.
For more information, please visit their website here.
-
Hamilton Kent
Hamilton Kent offers you a single source of supply for all your gaskets, seals, and custom rubber products. Hamilton Kent provides a complete package... from Design & Development, through Production & Q.A./Testing, to Warehousing & Shipping. Emphasis on close customer rapport, coupled with the technical expertise of our engineering and manufacturing staff, ensures you of a perfect product, on-time, each-time, every time.
For more information, please visit their website here.
-
Stone Strong Systems
It began in 2001 with a revolutionary concept for a gigantic retaining wall block. Today, the “Big Block Revolution” is in full swing as trade publications in numerous industries are now touting the many advantages of big blocks in general, and Stone Strong® specifically. As the only fully engineered big block system available today, Stone Strong is leading the charge.
For more information, please visit their website here.
-
The Neel Company
The Neel Company licenses and provides engineering support for high-tech precast concrete products including: The T-WALL® Retaining Wall System and the ISOGRID® M.S.E. Wall System.
For more information, please visit their website here.
-
BEBO Arch Systems
In the early 1960's, the Swiss engineer Dr. Werner Heierli began the development of overfilled concrete arch systems. The objective was to build concrete arches with a minimum thickness, sufficient to carry the applied loads, but also stender enough for the passive resistance of the backfill to be mobilised by means of elastic deformations of the arch. With this concept, the fill could contribute to the load carrying capacity of the arch and become part of the structure rather than just representing a loading. This phenomenon, known as the
For more information, please visit their website here.
-
CDS Technologies
Municipalities the world over are looking to CDS Technologies for comprehensive water treatment solutions that are as reliable as they are cost effective. Managing storm water, combined sewer overflow and sanitary wastewater, CDS systems win because they work. Our products are already shaping the future. With engineering expertise and product innovation, our systems perform with calculated tolerances and can be relied upon for long-term performance. As environmental controls come under increasing scrutiny, the demand for systems that can produce dependable results with minimal maintenance will set industry standards. CDS Technologies is poised to lead this charge.
For more information, please visit their website here.
-
Dayton/Richmond Concrete Accessories
When Julian Richmond began marketing the original screw anchor in 1911, the concrete accessory industry was born. In 1924, Dayton Sure-Grip & Shore was established with primary products including snap ties, shores and hangers. Today this brand group, through the Dayton Superior Supply Chain Management team, manufactures and distributes over 1,200 specialty concrete accessories.
For more information, please visit their website here.
-
ConSeal Concrete Sealants Inc.
Conseal is a manufacturer of sealants, extruded sealing tapes, primers, wraps, waterstops, coatings, mastics, hot-melts, lubricants and form release agents. Conseal's products are used to assemble and seal precast concrete pipes, manholes, box culverts, septic tanks, burial vaults, structures, buildings and components of all types. They are also used with poured-in-place construction joints, concrete bridge spans & decking, roadway surfaces, HVAC & electrical applications, log home joints and many other types of applications.
For more information, please visit their website here.
-
NPC Inc.
NPC Inc. was established in 1972 and has built its success upon outstanding customer service, innovation and quality. The Kor-N-Seal® pipe-to-manhole connectors and Hydrokor® production coring machinery are known throughout the precast concrete industry for their dependability and performance. NPC is recognized as a leading supplier for sanitary sewer, storm water and drainage systems world wide.
For more information, please visit their website here.
-
Link-Seal
Link-Seal® Modular Seals, Century-Line® Sleeves and Cell-Cast® Disks are used throughout the world to seal cylindrical objects passing through barriers of all types. To keep you abreast of how, why and where these products are being used to solve the toughest sealing problems we'll post projects here on a monthly basis. Who knows, you might be working on a project that's similar.
For more information, please visit their website here.
- Memberships & Affiliations
-
The American Concrete Pipe Association
The American Concrete Pipe Association (ACPA) is a nonprofit organization, composed primarily of manufacturers of concrete pipe and related conveyance products located throughout the United States, Canada and in over 40 foreign countries. ACPA membership also includes manufacturers of equipment and/or providers of products and services related to the concrete pipe industry.
For more information, please visit their website here.
-
NPCA
An international trade association, NPCA represents manufacturers of plant produced precast concrete products and companies that provide the equipment, supplies and services to make these products. Founded in 1965, NPCA connects leaders in the manufactured concrete industry through educational, leadership and networking opportunities. The association currently represents more than 900 companies that are committed to expanding the use of quality precast concrete. NPCA also provides technical and production information through 13 product committees, which consist of members who concentrate on specific product lines within the precast industry.
For more information, please visit their website here.
-
The Canadian Concrete Pipe Association
The Canadian Concrete Pipe Association (CCPA) is a non-profit industry association. CCPA/ACTB was established to coordinate research and development, promotion, education and government relations programs pertaining to the marketing of high quality precast concrete, wastewater and storm drainage products.
For more information, please visit their website here.
